Unistrut – P1000T – 1-5/8″ x 1-5/8″, 12 Gauge; Slotted

Features:

12 gauge slotted strut channel P1000T is the original metal framing strut channel and has been used in countless applications for nearly 100 years. Commonly known as 12 gauge standard or deep slotted channel, it is the global standard for strut metal framing. This channel is commonly used for trapeze supports, seismic bracing, ceiling grids, pipe, conduit, duct and cable tray supports, racks, and other general framing.

• OPM pre-approved for seismic applications
• Product dimensions are 1 5/8″ wide x 1 5/8″ tall x 12 ga. thick
• Slotted for 1/2″ rod and fasteners
• Slots are sized for a 1/2″ Threaded Rod or Fastener
• Our P1000T is available in Pre-Galvanized (PG), Unistrut Defender (DF), Hot-Dip Galvanized (HG), Plain (PL), Green (GR), Zinc Dichromate (ZD), Stainless Steel (SS or ST) and Aluminum (EA).
• Made in the USA

Standard Lengths:

• 10 feet:  10′ or 10’ ¹/₈” (3.05m) ± ¹/₈” (3 mm)
• 20 feet:  20′ or 20’ ³/₈” (6.11m) ± ¹/₈” (3 mm)

Special Lengths:

• Available with a tolerance of ±¹/₈” (3 mm).

Curved Channel:

• Many Unistrut channel sections can be supplied with a curve.

Load Data:

• All beam and column load data pertains to carbon steel and stainless steel channels.
• Load tables apply only to UNISTRUT brand channel. Look for “UNISTRUT” on the product.
• Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.
• Loads are based on 33 ksi steel cold formed to 42 ksi.
• Safety Factor to Yield Strength is 1.67 for Beam Loads and 1.80 for Column Loads.
• Beam loads are based on a simple beam and are given as a total uniform load (W) in pounds. For proper calculation procedures, refer to our Beam Load Calculation Guide under Resources.

Materials & Finishes

Materials & Finishes – Standard:

• Pregalvanized (PG):  Conforms to ASTM A653 SS GR 33, G90.
• Unistrut Defender (DF):  Conforms to ASTM A1046 SS GR 33
• Hot Dip Galvanized (HG):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
• Perma-Green (GR):  Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
• Perma-Gold (ZD):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
• Plain (PL):  Conforms to ASTM A1011 SS GR 33

Materials & Finishes – Special Metals:

• Stainless Steel, Type 304 (SS):  ASTM A240, Type 304 *
• Stainless Steel, Type 316 (ST):  ASTM A240, Type 316 *
• Aluminum (EA):  ASTM B221, Type 6063-T6 (Extruded) *

* These materials have different physical properties and performance characteristics.